Technical advantage/function: • Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustment, thereby representing more process reliability of the user • Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate. Working accuracy: +/- 3 % tolerance of scale set torque. The specification of the standard (+/- 4 %) is exceeded. • Lightweight yet robust (as the housing is made of an aluminium alloy) and resilient, very workshop-friendly • Depending on the application, access is possible from the front (e.g. open-end fitting) or side (e.g. reversible ratchet and socket) • Force to be applied in the middle of the handgrip only - do not use an extension tube as otherwise, inaccuracies can evolve (except for model DXZ where the DREMOMETER has been calibrated and adjusted using the extension tube) • Operation only with end fittings with standardised depth gauges, otherwise inaccuracies can arise. Keep the depth gauges on the certificate in mind. Only use original GEDORE accessories. • Large drive cross-section transfers maximum torques • Extremely low wear attributable to reduced forces in the lever mechanism • Forged lever chain from our own quality forge • Maximum precision even when subjected to extreme continuous use • Long life cycles and tool lives • Easy operation - fast and safe torque tightening • Easy adjustment thanks to attractive adjusting button secured against loss at the end of the handle • With certificate acc. to DIN EN ISO 6789, traceable via in-house DAkkS laboratory to national standards • Pre-set DREMOMETER for serial production wherever the same value always needs to be applied